document number: 93697 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 19-jun-08 1 phase control scr to-220ab full-pak, 16 a 16tts..fp high voltage series vishay high power products description/features the 16tts..fp high voltage seri es of silicon controlled rectifiers are specifically designed for medium power switching and phase control applications. the glass passivation technology used has reliable operation up to 125 c junction temperature. typical applications are in input rectification (soft start) and these products are designed to be used with vishay hpp input diodes, switches and ou tput rectifiers which are available in identical package outlines. fully isolated package (v ins = 2500 v rms ) is ul e78996 approved this product has been designed and qualified for industrial level. product summary v t at 10 a 1.4 v i tsm 200 a v rrm 800/1200 v (g) 3 2 (a) 1 (k) to-220ab full-pak output current in typical applications applications single-phase bridge three-phase bridge units capacitive input filter t a = 55 c, t j = 125 c, common heatsink of 1 c/w 13.5 17 a major ratings and characteristics parameter test conditions values units i t(av) sinusoidal waveform 10 a i rms 16 v drm /v rrm 800/1200 v i tsm 200 a v t 10 a, t j = 25 c 1.4 v dv/dt 500 v/s di/dt 150 a/s t j range - 40 to 125 c voltage ratings part number v rrm , maximum peak reverse voltage v v drm , maximum peak direct voltage v i rrm /i drm at 125 c ma 16TTS08FP 800 800 10 16tts12fp 1200 1200
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93697 2 revision: 19-jun-08 16tts..fp high voltage series vishay high power products phase control scr to-220ab full-pak, 16 a absolute maximum ratings parameter symbol test conditions values units typ. max. maximum average on-state current i t(av) t c = 95 c, 180 conduction, half sine wave 10 a maximum rms on-state current i rms 16 maximum peak, one-cycle, non-repetitive surge current i tsm 10 ms sine pulse, rated v rrm applied 170 10 ms sine pulse, no voltage reapplied 200 maximum i 2 t for fusing i 2 t 10 ms sine pulse, rated v rrm applied 144 a 2 s 10 ms sine pulse, no voltage reapplied 200 maximum i 2 t for fusing i 2 t t = 0.1 to 10 ms, no voltage reapplied 2000 a 2 s maximum on-state voltage drop v tm 10 a, t j = 25 c 1.4 v on-state slope resistance r t t j = 125 c 24.0 m threshold voltage v t(to) 1.1 v maximum reverse and direct leakage current i rm /i dm t j = 25 c v r = rated v rrm /v drm 0.5 ma t j = 125 c 10 holding current i h anode supply = 6 v, resistive load, initial i t = 1 a 16TTS08FP, 16tts12fp - 100 maximum latching current i l anode supply = 6 v, resistive load 200 maximum rate of rise of off-state voltage dv/dt 500 v/s maximum rate of rise of turned-on current di/dt 150 a/s triggering parameter symbol test conditions values units maximum peak gate power p gm 8.0 w maximum average gate power p g(av) 2.0 maximum peak positive gate current + i gm 1.5 a maximum peak negative gate voltage - v gm 10 v maximum required dc gate current to trigger i gt anode supply = 6 v, resistive load, t j = - 10 c 90 ma anode supply = 6 v, resistive load, t j = 25 c 60 anode supply = 6 v, resistive load, t j = 125 c 35 maximum required dc gate voltage to trigger v gt anode supply = 6 v, resistive load, t j = - 10 c 3.0 v anode supply = 6 v, resistive load, t j = 25 c 2.0 anode supply = 6 v, resistive load, t j = 125 c 1.0 maximum dc gate voltage not to trigger v gd t j = 125 c, v drm = rated value 0.2 maximum dc gate current not to trigger i gd 2.0 ma switching parameter symbol test conditions values units typical turn-on time t gt t j = 25 c 0.9 s typical reverse recovery time t rr t j = 125 c 4 typical turn-off time t q 110
document number: 93697 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 19-jun-08 3 16tts..fp high voltage series phase control scr to-220ab full-pak, 16 a vishay high power products thermal and mechanical specifications parameter symbol test conditions values units maximum junction and storage temperature range t j , t stg - 40 to 125 c maximum thermal resistance, junction to case r thjc dc operation 1.5 c/w maximum thermal resistance, junction to ambient r thja 62 typical thermal resistance, case to heatsink r thcs mounting surface, smooth and greased 1.5 approximate weight 2g 0.07 oz. mounting torque minimum 6 (5) kgf cm (lbf in) maximum 12 (10) marking device case style to-220ab full-pak (94/v0) 16TTS08FP 16tts12fp
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93697 4 revision: 19-jun-08 16tts..fp high voltage series vishay high power products phase control scr to-220ab full-pak, 16 a fig. 1 - current rating characteristics fig. 2 - current rating characteristics fig. 3 - on-state power loss characteristics fig. 4 - on-state power loss characteristics fig. 5 - maximum non-repetitive surge current fig. 6 - maximum non-repetitive surge current 80 90 100 110 120 130 024681012 30 60 90 120 180 maximum allowable case temperature (c) conduction angle average on-state current (a) 16tts..fp series r (dc) = 1.5 c/w thjc 80 90 100 110 120 130 0 2 4 6 8 10 12 14 16 18 dc 30 60 90 120 180 average on-state current (a) maximum allowable case temperature (c) conduction period 16tts..fp series r (dc) = 1.5 c/ w thjc 0 2 4 6 8 10 12 14 16 18 0 2 4 6 8 10 12 rm s li m i t conduction angle maximum average on-state power loss (w) average on-state current (a) 180 120 90 60 30 16tts..fp series t = 125c j 0 5 10 15 20 25 0481216 dc 180 120 90 60 30 rm s li m i t conduction period maximum average on-state power loss (w) average on-state current (a) 1 6 tts. . fp se r i e s t = 1 2 5 c j 80 100 120 140 160 180 110100 number of equal amplitude half cycle current pulses (n) at any rated load condition and with rated v applied following surge. init ia l t = 125c @ 60 hz 0.0083 s @ 50 hz 0.0100 s rrm j peak half sine wave on-state current (a) 16tts..fp series 80 100 120 140 160 180 200 0.01 0.1 1 pu lse tra in du ra t io n ( s) maximum non repetitive s urge current pe a k ha l f s ine wave forward current (a) versus pulse train duration. init ia l t = 125c no voltage reapplied rated v reapplied j rrm 16tts..fp series
document number: 93697 for technical ques tions, contact: diodes-tech@vishay.com www.vishay.com revision: 19-jun-08 5 16tts..fp high voltage series phase control scr to-220ab full-pak, 16 a vishay high power products fig. 7 - on-state voltage drop characteristics fig. 8 - thermal impedance z thjc characteristics fig. 9 - gate characteristics 1 10 100 1000 012345 t = 2 5 c j insta nt a neo us on-sta t e curre nt (a) in st a n t a n e o u s o n - st a t e v o l t a g e ( v ) t = 1 2 5 c j 1 6 tts. . fp se r i e s 0.01 0.1 1 10 0.0001 0.001 0.01 0.1 1 10 sq u a r e w a v e pu l se d u r a t i o n ( s) steady state value (dc operation) sing le pulse thjc transient thermal impedance z (c/w) 1 6 tts. . fp se r i e s d = 0.50 d = 0.33 d = 0.25 d = 0.17 d = 0.08 0.1 1 10 100 0.001 0.01 0.1 1 10 100 (b) (a) rectangular gate pulse (4) (3) (2) (1) in st a n t a n e o u s g a t e c u r r e n t ( a ) in st a n t a n e o u s g a t e v o l t a g e ( v ) t j = 25 c tj = 1 2 5 c b)recommended load line for vgd ig d fre q u e n c y li m it e d b y pg ( a v ) a)recommended load line for rated di/dt: 10 v, 20 ohms t r = 0.5 s, tp >= 6 s <= 30% rated di/dt: 10 v, 65 ohms tr = 1 s, tp >= 6 s (1) pgm = 40 , tp = 1 ms (2) pgm = 20 w, tp = 2 ms (3) pgm = 8 w, tp = 5 ms (4) pgm = 4 w, tp = 10 ms t j = -10 c 1 6 tts. . fp se r i e s
www.vishay.com for technical questi ons, contact: diodes-tech@vishay.com document number: 93697 6 revision: 19-jun-08 16tts..fp high voltage series vishay high power products phase control scr to-220ab full-pak, 16 a ordering information table 1 - current rating, rms value 2 - circuit configuration: 3 - package: 4 5 - voltage code x 100 = v rrm t = single thyristor - type of silicon: t = to-220ab s = converter grade 7 - none = standard production pbf = lead (pb)-free 08 = 800 v 12 = 1200 v 6 - full-pak note: for higher voltage up to 1600 v contact factory device code 5 13 24 67 16 t t s 12 fp - links to related documents dimensions http://www.vishay.com/doc?95072 part marking information http://www.vishay.com/doc?95069
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
